HIKVISION DS-19A08-F/Kx, User Manual, Page: 38 / 157

Control Panel User Manual
38
Command Command
Description
Command Command
Description
Command Command
Description
01 Entering
Delay
02 Exiting
Delay
03 Arming
04 Disarming 05 Alarm 06 Alarm
Clearing
07 Alarm
Recovery
{6} End the command.
After successfully operating once, you can continuously do configuration with
the command of
{ Project } + { Trigger No. } + { System Command. } + { Event
Command } + { # } .
3.1.9 Trigger Time Settings
For Trigger output time settings, please refer to the command below.
470 00 00 00 #
1 4 2
3
5
{1} Trigger Time Programming Address: 470
{2} Trigger No.
{3} Duration: In minute
{4} Duration: In second
{5} End the command.
The maximum duration of triggering is 99 minutes and 59 seconds. The default
duration is 30 seconds.
After operating once, you can continuously configure with the command of
{Project} + {Trigger No.} + {Duration} + {#}