Title:
How to Confirm Fault Type When
Control Panel in Zone Fault Status
Version:
v1.0
Date:
7/11/2017
Product:
Alarm Device
Page:
1 of 3
Description
When control panel is in disarm status, it shows “Zone Fault” for some zones. In
this case, control panel can not arm system successfully.
Problem Checking Flow
Zone Fault
Detector is in
alarm
Remove Detector,
Replaced with an
EOL directly
Connect to zone
terminal
Fault
Disappears?
Measure Voltage
between zone
’
s
terminal Z and G
故障是否消失
Keep Detector in
Normal Statues,
Fault
Disappears?
NO Problem in
Detector and
Control Panel
探测器故障
Detector Fault or
Wiring Fault
总线接线问题
Voltage in
Normal Range
Detector Fault or
Wiring Fault
Control Panel Fault
Yes
NO
No
NO
NO
NO
Yes
Yes
Yes
