4.1.3 Manage Auto-switch Group
Create Auto-switch Group
It would be easier to manage your devices by adding relevant cameras into a group. For example,
you can add all the underground garage cameras into one auto-switch group, so you can view the
group to view the cameras in it.
Steps
1. Click Keyboard.
2. Click .
3. Click Device → Auto-switch Group .
4. Click .
5. Enter the group parameters.
Figure 4-7 Create a New Group
Name
Enter the group name as desired. Special characters, including / : * ? ' " < > | %, are not
allowed, and the length cannot exceed 32 characters.
No.
Enter the group number as desired. The range is from 1 to 16, and it cannot be repeated. Up
to 64 cameras can be added in each group, no more than 16 groups can be added.
Time
Enter the cycle dwell time for each channel as desired. The range is from 10s to 10000s. The
default dwell time is 30s.
6. Click Add.
DS-1600KI Keyboard Quick Start Guide
13
Summary of Contents for DS-1600KI
Page 1: ...DS 1600KI Keyboard Quick Start Guide ...
Page 43: ...UD17856B ...
