• Check DHCP to obtain IP address and related network parameters automatically.
• Uncheck DHCP and enter IP address, gateway, subnet mask.
3. Click Save.
Figure 8-10 Network Parameters
8.6 System Settings
8.6.1 Version
Go to System Management → Version to view system version information, including device type,
serial No., firmware version, decoding version, MCU version and web version.
Figure 8-11 Version Information
8.6.2 User Management
Administrator can add operator and allocate devices to operator. Operator permissions are as
follows:
DS-1100KI(B) Network Keyboard User Manual
54
