DS-1200KI/1006KI Keyboard
User Manual
28
Select Serial Port to enter the settings. You can configure the address bit (RS-485 only), baud rate,
data bit, protocol, stop bit, parity, and copy all settings. When you set the Copy All to Yes for RS-
485 serial port, the current settings will be copied to the connection of all other RS-485 devices.
Click the OK button or the central button of joystick to save the settings.
The RS-485/RS-422 parameters configured here must be the same with the connected dome/DVR
or MAG.
Hardware
You can set the auto-logoff and backlight feature of the keyboard.
Select Hardware to enter the following interface, and move (left/right) the joystick to set the
function of A-Logoff and Backlight as needed. Click OK button or the central button of joystick to
save the settings.
When the auto-logoff is set to ON, the system will automatically log off after the device is not
operated for 30 minutes; the duration of backlight can be set as Open (always turned on), 5min,
10min, 30min and 60min.
Time Settings
Select Time to enter the system time settings interface. You can set the value of year, month, date,
time format, hour, minute and second. Click OK button or the central button of joystick to save the
settings.