DeepinMind Series NVS User Manual
iDS-67 00 Deep inMind Series NVS User Manua l
48
Chapter 6 Event Settings
6.1 Configuring Basic Events
You can configure the basic events by following the instructions in this section, including motion
detection, video tampering, alarm input, alarm output, and exception, etc. These events can
trigger the linkage methods, such as Notify Surveillance Center, Send Email, Trigger Alarm Output,
etc.
6.1.1 Configuring Motion Detection
Motion detection is a feature which can alert the personnel and record the video for the motion
occurred in the surveillance scene.
Step 1
Go to
Configuration> Event > Basic Event > Motion
to enter the motion detection settings
page.
Step 2
Select the camera to configure the motion detection.
Step 3
Check
Enable Motion Detection
.
Step 4
(Optional) Check
Enable Dynamic Analysis for Motion
. When this feature is enabled, the
motion detection triggered frame (green) for the moving targets in the motion detection
area will be displayed on the live video.
Step 5
Set the motion detection area.
3)
Click
Area Settings
tab.
