HIKVISION DeepinMind iDS-6700NXI-I/8F(B) Series User Manual Download Page 126

Page: 126 / 222

Network Video Recorder User Manual

124

Release the mouse to the required time point to enter the full-screen playback.



The fast view is supported only in the 1X single-camera playback mode.

10.2.8 Digital Zoom

In the video playback mode, click

from the toolbar to enter the digital zoom interface.

You can move the sliding bar or scroll the mouse wheel to zoom in/out the image to different
proportions (1 to16X).

Figure 10-14

Digital Zoom

Summary of Contents for DeepinMind iDS-6700NXI-I/8F(B) Series































































































































































































































Search results

Summary of Contents for DeepinMind iDS-6700NXI-I/8F(B) Series

Reviews:

Related manuals for DeepinMind iDS-6700NXI-I/8F(B) Series

Brands by name

Popular brands

HIKVISION DeepinMind iDS-6700NXI-I/8F(B) Series, User Manual

Search results

Summary of Contents for DeepinMind iDS-6700NXI-I/8F(B) Series

Reviews:

Related manuals for DeepinMind iDS-6700NXI-I/8F(B) Series

Brands by name

Popular brands