-5-
Figure 2.3
2. The steps of radar installation
a.
Install the cardan
Before installing the radar, we need to install cardon first.
Cardon is one of the most common methods to install the radar of CSR-I series and it is
able to be installed in the different environmental conditions after adjusting appropriately.
The installation method of cardon is very simple, and please refer to figure 2.4. The design
sketch after installation can be referred to figure 2.5.
Figure 2.4 Figure 2.5
Attention: The installation direction of radar has a very vital influence upon the speed measured.
Please confirm the validity of installation direction when installing the radar and install it according to
the direction shown in figure 2.6.
