TVI
Turret & Bullet Camera
User Manual
Thank you for purchasing our product. If there
are any ques
ti
ons, or requests, please do not
hesitate to contact the dealer.
This manual may contain several technical
incorrect places or prin
tin
g errors, and the
content is subject to change without
notice
.
The updates will be added to the new version of
this manual. We will readily improve or update
the products or procedures described in the
manual.
Regulatory Informa
tio
n
FCC Informa
tio
n
FCC compliance:
This equipment has been
tested and found to comply with the limits for a
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable prot
ectio
n against harmful
interference when the equipment is operated in
a commercial environment. This equipment
generates, uses, and can radiate radio
frequency energy and, if not installed and used
in accordance with the ins
tructio
n manual, may
cause harmful interference to radio
communica
tions
. Opera
tio
n of this equipment in
a residen
tia
l area is likely to cause harmful
interference in which case the user will be
required to correct the interference at his own
expense.
FCC
Condition
s
This device complies with part 15 of the FCC
Rules. Opera
ti
on is subject to the following two
c
onditions
:
1. This device may not cause harmful
interference.
2. This device must accept any interference
received, including interference that may
cause undesired opera
tio
n
.
EU Conformity Statement
upon the purchase of equivalent new equipment,
or dispose of it at designated collection points.
For more information see:
www.recyclethis.info.
2006/66/EC (ba
tt
ery dire
cti
ve):
This product contains a ba
tt
ery that
cannot be disposed of as unsorted
municipal waste in the European
Union.
See the product documenta
tio
n for
specifi
c
ba
tt
ery informa
ti
on. The ba
tt
ery is marked with
this symbol, which may include le
tt
ering to
indicate cadmium (Cd), lead (Pb), or mercury (Hg).
For proper recycling, return the ba
tt
ery to your
supplier or to a designated c
ollectio
n point. For
more informa
tio
n see: www.recyclethis.info.
2012/19/EU (WEEE dire
cti
ve):
Products marked with this symbol
cannot be disposed of as unsorted
municipal waste in the European
Union. For proper recycling, return
this product to your local supplier
Please refer to the product
specifi
ca
tio
n for
camera parameters and
functions
.
This product and - if applicable - the
supplied accessories too are marked
with "CE" and comply therefore with
the applicable harmonized European
standards listed under the Low Voltage Direc
ti
ve
2006/95/EC, the EMC Dire
cti
ve 2004/108/EC
,
the RoHS Dire
cti
ve 2011/65/EU.
TURBO HD
This series of camera adopts new genera
ti
on
sensor with high
sensitivit
y and advanced circuit
design technology It features high re
solution
,
.
low image distor
ti
on and low noise, etc , which
.
makes it suitable for surveillance system and
image processing system
.
High performance CMOS sensor and high
re
solutio
n bring high-quality image;
Low illumina
tion
;
OSD menu, parameters are con
fig
urable;
Support auto white balance, auto gain control,
electronic shu
tt
er control;
Support image e
ff
ect adjustment;
Unit transmission control;
Advanced 3-axis design meets di
ff
erent
installa
ti
on requirements.
1 Intr
oductio
n
1.1 Product Features
2 Installa
tio
n
Check the speci
fi
ca
ti
on of the products for the
installa
tio
n environment.
Check whether the power supply is matched
with your power output to avoid damage.
Please make sure the wall is strong enough to
withstand three
ti
mes the weight of the camera
and the moun
ting
.
If the wall is the cement wall, you need to insert
expansion screws before you install the camera.
If the wall is the wooden wall, you can use
self-tapping screw to secure the camera.
If the product does not
functio
n properly,
please contact your dealer or the nearest
service center. Do not disassemble the camera
for repair or maintenance by yourself.
1.2 Overview
1.2.1 Overview of Type I Camera
1.2.2 Overview of Type Camera
II
Figure 1-1 Overview of Type I Camera
Figure 1-2 Overview of Type Camera
II
2.1 Installa
tio
n of Type Camera
I
Steps:
1.Drill the screw holes and the cable hole on the
ceiling according to the supplied drill template.
Figure 2-1 The Drill Template
2 Push the lock bu
tt
on to disassemble the camera
.
from the moun
tin
g base.
Figure 2-2 Release The Lock Screw
Please make sure that the device in the package
is in good c
onditio
n and all the assembly parts
are included.
Make sure that all the related equipment is
power-o
ff
during the installa
tion
.
3.Fix the moun
tin
g base to the ceiling.
Before you start
:
Cameras in some models do not support OSD
menu. For actual opera
ti
on, please refer to the
specifi
ca
tio
n of each model.
4.Route the cables to the cable hole and connect
the corresponding cables.
5.Secure the camera to the moun
tin
g base by
supplied screws. Keep the word UP on the camera
being upright during the installa
ti
on to make the
image showing normally.