HIKVISION 7200HQHI-SH Series User Manual Download

Page: 99 / 196

User Manual of Digital Video Recorder

Playback management.

The toolbar in the bottom part of Playback interface can be used to control playing process.

Figure 6. 19

Interface of Playback by Log

6.1.7

Playing Back External File

Purpose:

Perform the following steps to look up and play back files in the external devices.

Steps:

Enter Tag Search interface.

Menu>Playback

Select the

External File

in the drop-down list on the top-left side.

The files are listed in the right-side list.

You can click the

button to refresh the file list.

Select and click the

button to play back it.

Figure 6. 20

Interface of External File Playback

Summary of Contents for 7200HQHI-SH Series





































































































































































































Search results

Summary of Contents for 7200HQHI-SH Series

Reviews:

Related manuals for 7200HQHI-SH Series

Brands by name

Popular brands

HIKVISION 7200HQHI-SH Series, User Manual

Search results

Summary of Contents for 7200HQHI-SH Series

Reviews:

Related manuals for 7200HQHI-SH Series

Brands by name

Popular brands