HIKVISION 7200HQHI-SH Series User Manual Download

Page: 43 / 196

User Manual of Digital Video Recorder

3.1

Introduction of Live View

Live view shows you the video image getting from each camera in real time. The DVR will automatically enter

Live View mode when powered on. It is also at the very top of the menu hierarchy, thus hitting the ESC many

times (depending on which menu you’re on) will bring you to the Live View mode.

Live View Icons

In the live view mode, there are icons at the right top of the screen for each channel, showing the status of the

record and alarm in the channel, so that you can know whether the channel is recorded, or whether there are

alarms occur as soon as possible.

Table 3. 1

Description of Live View Icons

Icons

Description

Alarm (video loss, tampering, motion detection or sensor alarm)

Record (manual record, schedule record, motion detection or alarm triggered record)

Alarm & Record

Event/Exception (motion detection, sensor alarm or exception information. For details,

see

Chapter 8.7 Handling Exceptions.

)

Summary of Contents for 7200HQHI-SH Series





































































































































































































Search results

Summary of Contents for 7200HQHI-SH Series

Reviews:

Related manuals for 7200HQHI-SH Series

Brands by name

Popular brands

HIKVISION 7200HQHI-SH Series, User Manual

Search results

Summary of Contents for 7200HQHI-SH Series

Reviews:

Related manuals for 7200HQHI-SH Series

Brands by name

Popular brands