HIKVISION 7200HFI-SV Series User Manual Download Page 85

Page: 85 / 254

User Manual of Digital Video Recorder

6.1

Playing Back Record Files

Notes:

Chapte

r 6.1, we use the interface of DS-9100HFI-ST series (unless otherwise stated) as example to

describe the following settings.

Frame extracting mode is only supported by DVR series.

6.1.1

Playing Back by Channel

Purpose:

Play back the recorded video files of a specific channel in the live view mode. Channel switch is supported.

Instant playback by channel:

Choose a channel in live view mode using the mouse and click the

button in the quick setting toolbar.

Note:

Only record files recorded during the last five minutes on this channel will be played back.

Figure 6. 1

Instant Playback Interface

Playback by channel

Steps:

Enter the Playback interface.

Mouse: Right-click a channel in live view mode and select

Playback

from the menu, as shown in Figure

6.2.

Summary of Contents for 7200HFI-SV Series































































































































































































































































Search results

Summary of Contents for 7200HFI-SV Series

Reviews:

HIKVISION 7200HFI-SV Series, User Manual, Page: 85 / 254

Search results

Summary of Contents for 7200HFI-SV Series

Reviews: