HIKVISION 7200HFI-SV Series, User Manual, Page: 41 / 254

User Manual of Digital Video Recorder
40
3.2 Operations in Live View Mode
In live view mode, there are many functions provided. Some of the functions are listed below.
•
Single Screen : showing only one screen on the monitor.
•
Multi-screen: showing multiple screens on the monitor simultaneously.
•
Auto-switch: the screen is auto switched to the next one. And you must set the dwell time for each screen
on the configuration menu before enabling the auto-switch.
Menu>Configuration>Live View>Dwell Time.
•
Start Recording: start all-day normal recording or motion detection recording for all channels.
•
Playback: play back the recorded videos for current day.
•
Aux Monitor: the device checks the connection of the output interfaces to define the main and auxiliary
output interfaces. See the table below for the priority level of the main and aux outputs.
Table 3. 2 Priorities of Outputs for DS-9100/9000/8100/8000HWI-ST & DS-7200 & DS-7600 Series
HDMI/VGA CVBS Main output Auxiliary
output
1
√ √
HDMI/VGA CVBS
2
√
× HDMI/VGA
3 ×
√
CVBS
Table 3. 3 Priorities of Outputs for Other Models
HDMI VGA CVBS Main output Auxiliary
output
1
√ √ √
HDMI VGA
2
√
×
√
HDMI CVBS
3 ×
√ √
VGA CVBS
4 × ×
√
CVBS

√
means the interface is in use,
×
means the interface is out of use or the connection is invalid. And the
HDMI, VGA and CVBS can be used at the same time.
When the aux output is enabled, the main output can’t do any operation, and you can do some basic operation
on the live view mode for the Aux output.
3.2.1 Front Panel Operation
Note: Front panel operation is not supported by 7200HWI-SV, 7200HFI-SV and 7600HI-ST series.
Table 3. 4 Front Panel Operation in Live View
Functions Front Panel Operation
Show single screen Press the corresponding Alphanumeric button. E.g. Press 2 to display only the screen
for channel 2.
Show multi-screen Press the PREV/FOCUS- button.
Manually switch Next screen: right direction button.