HIKVISION 7200HFI-SV Series, User Manual, Page: 37 / 254

User Manual of Digital Video Recorder
36
Figure 2. 18 Protocol Management Interface
2. There are 16 customized protocols provided in the system, you can select a Custom Protocol and
configure its corresponding parameters to customize it.
Note: Before customizing the protocol for the network camera, you have to contact the manufacturer of
the network camera to consult the URL (uniform resource locator) for getting main stream and sub-stream.
Example: The format of the URL is: [Type]://[IP Address of the network camera]:[Port]/[Path]. E.g.,
rtsp://192.168.1.55:554/ch1/main/av_stream.

Protocol Name: Edit the name for the custom protocol.

Enable Substream: If the network camera does not support sub-stream or the sub-stream is not needed,
leave the checkbox empty.

Type: The network camera adopting custom protocol must support getting stream through standard
RTSP.

Transfer Protocol: Select the transfer protocol for the custom protocol.

Port: Set the port No. for the custom protocol.

Path: Set the resource path for the custom protocol. E.g., ch1/main/av_stream.
3. Click to save the settings and click to finish customizing the protocol.
4. After successfully adding the custom protocols, you can see the protocol name listed in the dropdown list,
see the figure below.