HIKVISION 7200HFI-SV Series, User Manual, Page: 24 / 254

User Manual of Digital Video Recorder
23
DS-8100/8000HWI-ST
Figure 1. 5 Rear Panel (1)
Table 1. 6 Description of Rear Panel (1)
No. Item Description
1 VIDEO IN BNC connector for analog video input.
2 LOOP OUT
(for
DS-9100/9000HFI-ST/RT/XT
& 9100/9000HWI-ST series)
BNC connector for video loop output.
3 VIDEO SPOT OUT BNC connector for video output.
4 VIDEO OUT BNC connector for video output.
5 AUDIO OUT RCA (for DS-9100/9000 series) / BNC (for DS-8100/8000 series)
connector for audio output. This connector is synchronized with
VIDEO OUT.
6 LINE IN RCA (for DS-9100/9000 series) / BNC (for DS-8100/8000 series)
connector for two-way audio.
7 AUDIO IN RCA (for DS-9100/9000 series) / BNC (for DS-8100/8000 series)
connector for audio input.
8 AUDIO IN
(for
DS-9100/9000HFI-ST/RT/XT
& 9100/9000HWI-ST series)
DB26 connector for audio input.
9 RS-232 Interface Connector for RS-232 devices.
10 VGA DB9 connector for VGA output. Display local video output and
menu.
11 HDMI HDMI video output connector.
12 eSATA Connects external SATA HDD, DVD-R/W.
13 LAN Interface Network interface.
14 Termination Switch RS-485 termination switch.
Up position is not terminated.
Down position is terminated with 120Ω resistance.
15
RS-485 Interface Connector for RS-485 devices. T+ and T- pin connects to R+ and R-
pin of PTZ receiver respectively.
Controller Port
D+, D- pin connects to Ta, Tb pin of controller. For cascading
devices, the first DVR’s D+, D- pin should be connected with the
D+, D- pin of the next DVR.
ALARM IN Connector for alarm input.
ALARM OUT Connector for alarm output.
16 GROUND Ground (needs to be connected when DVR starts up).