HIKVISION 7200HFI-SV Series User Manual Download Page 234

Page: 234 / 254

User Manual of Digital Video Recorder

233

Figure 14. 10

User Permission Settings Interface for HDVR Series

Note:

Local Camera Management is supported by HDVR series.

Set the operating permission of Local Configuration, Remote Configuration and Camera Configuration for

the user.

Local Configuration

•

Local Log Search: Searching and viewing logs and system information of device.

•

Local Parameters Settings: Configuring parameters, restoring factory default parameters and

importing/exporting configuration files.

•

Local Camera Management: Enabling and disabling analog camera (s). Adding, deleting and

editing of network camera (s). This function is supported by HDVR series.

•

Local Advanced Operation: Operating HDD management (initializing HDD, setting HDD

property), upgrading system firmware, clearing I/O alarm output.

•

Local Shutdown /Reboot: Shutting down or rebooting the device.

Remote Configuration

•

Remote Log Search: Remotely viewing logs that are saved on the device.

•

Remote Parameters Settings: Remotely configuring parameters, restoring factory default

parameters and importing/exporting configuration files.

•

Remote Camera Management: Remotely enabling and disabling analog camera (s), and adding,

deleting and editing of network camera (s). This function is supported by HDVR series.

•

Remote Serial Port Control: Configuring settings for RS-232 and RS-485 ports.

•

Remote Video Output Control: Sending remote control panel signal.

•

Two-way Audio: Realizing two-way radio between the remote client and the device.

•

Remote Alarm Control: Remotely arming (notify alarm and exception message to the remote

client) and controlling the alarm output.

•

Remote Advanced Operation: Remotely operating HDD management (initializing HDD, setting

HDD property), upgrading system firmware, clearing I/O alarm output.

•

Remote Shutdown/Reboot: Remotely shutting down or rebooting the device.

Camera Configuration

•

Remote Live View: Remotely viewing live video of the selected camera (s).

•

Local Manual Operation: Locally starting/stopping manual recording, picture capturing and

alarm output of the selected camera (s).

•

Remote Manual Operation: Remotely starting/stopping manual recording, picture capturing and

alarm output of the selected camera (s).

Summary of Contents for 7200HFI-SV Series































































































































































































































































Search results

Summary of Contents for 7200HFI-SV Series

Reviews:

HIKVISION 7200HFI-SV Series, User Manual, Page: 234 / 254

Search results

Summary of Contents for 7200HFI-SV Series

Reviews: