HIKVISION 7200HFI-SV Series User Manual Download Page 233

Page: 233 / 254

User Manual of Digital Video Recorder

232

•

Operator:

The

Operator

user level has permission of Local Log Search in Local Configuration,

Remote Log Search and Two-way Audio in Remote Configuration and all operating permission in

Camera Configuration.

•

Guest:

The

Guest

user has permission of Local Log Search in Local Configuration, Remote Log

Search in Remote Configuration and only has the local/remote playback in the Camera Configuration.

User’s MAC Address:

The MAC address of the remote PC which logs onto the device. If it is configured

and enabled, it only allows the remote user with this MAC address to access the device.

Click

to save the settings and go back to the User Management interface. The added new user will

be displayed on the list.

Figure 14. 8

Added User Listed in User Management Interface

Select the user from the list and then click the

button to enter the Permission Settings interface.

Figure 14. 9

User Permission Settings Interface for DVR Series

Summary of Contents for 7200HFI-SV Series































































































































































































































































Search results

Summary of Contents for 7200HFI-SV Series

Reviews:

HIKVISION 7200HFI-SV Series, User Manual, Page: 233 / 254

Search results

Summary of Contents for 7200HFI-SV Series

Reviews: