HIKVISION 7200HFI-SV Series User Manual Download Page 231

Page: 231 / 254

User Manual of Digital Video Recorder

230

14.4

Configuring More Settings

Steps:

Enter the General Settings interface.

Menu > Configuration > General

Click the

More Settings

tab to enter the More Settings interface.

Figure 14. 5

More Settings Interface

Configure the following settings:

•

Device Name:

Edit the name of device.

•

Device No.:

Edit the serial number of device. The Device No. can be set in the range of 1~255, and

the default No. is 255.

•

CVBS Output Brightness:

Adjust the video output brightness.

•

Auto Logout:

Set timeout time for menu inactivity. E.g., when the time is set to

5 Minutes

, then

the system will exit from the current operation menu to live view screen after 5 minutes of menu

inactivity.

•

Menu Output Mode:

Set the menu output mode as Auto, HDMI, VGA or Main CVBS. E.g.,

when VGA is selected and VGA output interface is connected, then the menu will be displayed on

VGA monitor.

Note:

For 9100/9000/8100/8000HWI-ST & 7200HFI(HWI)-SV & 7600HI-ST series, Auto,

HDMI/VGA and Main CVBS are selectable for Menu Output Mode.

Click

to save the settings.

Summary of Contents for 7200HFI-SV Series































































































































































































































































Search results

Summary of Contents for 7200HFI-SV Series

Reviews:

HIKVISION 7200HFI-SV Series, User Manual, Page: 231 / 254

Search results

Summary of Contents for 7200HFI-SV Series

Reviews: