HIKVISION 7200HFI-SV Series User Manual Download Page 222

Page: 222 / 254

User Manual of Digital Video Recorder

221

13.3

Importing/Exporting Configuration Files

Purpose:

The configuration files of the device can be exported to local device for backup; and the configuration files of one

device can be imported to multiple device devices if they are to be configured with the same parameters.

Steps:

Enter the Import/Export Configuration File interface.

Menu > Maintenance > Import/Export

Figure 13. 14

Import/Export Config File

Click

to export configuration files to the selected local backup device.

To import a configuration file, select the file from the selected backup device and click

. After the

import process is completed, you must reboot the device.

Note:

After having finished the import of configuration files, the device will reboot automatically.

Summary of Contents for 7200HFI-SV Series































































































































































































































































Search results

Summary of Contents for 7200HFI-SV Series

Reviews:

HIKVISION 7200HFI-SV Series, User Manual, Page: 222 / 254

Search results

Summary of Contents for 7200HFI-SV Series

Reviews: