HIKVISION 7200HFI-SV Series User Manual Download Page 213

Page: 213 / 254

User Manual of Digital Video Recorder

212

Note:

IP Camera is supported by the HDVR series.

Select the camera to set image parameters.

Select the mode from the dropdown list of

Mode

. For analog cameras, four modes are selectable: Standard,

Indoor, Dim Light and Outdoor. While for network cameras, only Customized is supported.

Adjust the image parameters according to actual needs. The parameters are including Brightness, Contrast,

Saturation, Hue, Sharpness and Denoising. You can also click

to restore the default settings.

Note:

Sharpness, Denoising and restoring default settings are not supported by network cameras.

You can click

to copy the image settings of the current camera to other analog cameras. Please refer

to step 7 of

Chapter 12.1 Configuring OSD Settings

Note:

Copying the image settings to network cameras is not available.

Click

to save the settings.

Summary of Contents for 7200HFI-SV Series































































































































































































































































Search results

Summary of Contents for 7200HFI-SV Series

Reviews:

HIKVISION 7200HFI-SV Series, User Manual, Page: 213 / 254

Search results

Summary of Contents for 7200HFI-SV Series

Reviews: