HIKVISION 7200HFI-SV Series, User Manual, Page: 190 / 254

User Manual of Digital Video Recorder
189
Note: In this chapter, we use the interface of DS-9100HFI-ST series (unless otherwise stated) as example to
describe the following settings.
11.1 Initializing HDDs
Purpose:
A newly installed hard disk drive (HDD) must be initialized before it can be used with your device.
Note: If there is uninitialized HDD existed in the device, the following message box pops up when the device
starts up.
Figure 11. 1 Message Box of Uninitialized HDD
Click to initialize it immediately or you can perform the following steps to initialize the HDD(s).
Steps:
1. Enter the HDD Information interface.
Menu > HDD>General
Figure 11. 2 HDD Information Interface
2. Select HDD to be initialized.
3. Click .