HIKVISION 7200HFI-SV Series User Manual Download Page 177

Page: 177 / 254

User Manual of Digital Video Recorder

176

Figure 10. 14

Physical Disk Settings Interface

13.

Select a disk and click

to enter the Set Hot Spare interface.

Figure 10. 15

Set Hot Spare Interface

14.

Set the hot spare type of the selected HDD to Global Hot Spare or the specified hot spare for the existing

array.

Global Hot Spare:

It can be used as the hot spare for any array created in the system.

Array Hot Spare

(e.g. RAID 5): It can be used as the hot spare for the specified array only.

15.

Click

to finish the settings.

Note:

When the auto-rebuild function is enabled, the hot spare disk will be automatically used for array

rebuilding if the virtual disk is in

Degraded

status.

Summary of Contents for 7200HFI-SV Series































































































































































































































































Search results

Summary of Contents for 7200HFI-SV Series

Reviews:

HIKVISION 7200HFI-SV Series, User Manual, Page: 177 / 254

Search results

Summary of Contents for 7200HFI-SV Series

Reviews: