HIKVISION 7200HFI-SV Series, User Manual, Page: 158 / 254

User Manual of Digital Video Recorder
157
If you select Manual as the mapping type, you can edit the external port on your demand by clicking
to activate the External Port Settings dialog box.
Steps:
1) Click to activate the External Port Settings dialog box. Configure the external port No. for
server port, http port, RTSP port and https port respectively.
Notes:

You can use the default port No., or change it according to actual requirements.

External Port indicates the port No. for port mapping in the router.

The value of the port No. should be between 1 and 65535 and the value must be different from each
other. If multiple devices are configured for the UPnP™ settings under the same router, the value of
the port No. for each device should be unique.
Figure 9. 26 External Port Settings Dialog Box
2) Click to save the settings.
3) You can click to get the latest status of the port mapping.
Figure 9. 27 UPnP™ Settings Finished-Manual
9.2.7 Configuring Remote Alarm Host Settings
Purpose:
With a remote alarm host configured, the device will send the alarm event or exception message to the host
when an alarm is triggered. The remote alarm host must have the CMS (Client Management System) software
installed.
Steps:
1. Enter the Network Settings interface.
Menu > Configuration > Network