HIKVISION 7200HFI-SV Series, User Manual, Page: 156 / 254

User Manual of Digital Video Recorder
155
that with FTP protocol.
Directory: In the Directory field, you can select the Root directory, Parent directory and secondary
directory. When the Parent Directory is selected, you have the option to use the Device Name,
Device No. or Device IP for the name of the directory, or you can customize the directory name; and
the when the Secondary Directory is selected, you can use the Camera Name or Camera No. as the
name of the directory, or you can customize the directory name.
Note: If you want to modify the Device Name, Device No., Device IP or Camera Name, please enter
the corresponding interface to modify.
6. Click to save and exit the interface.
Note: Please make sure the remote FTP server has been started up before setting the FTP parameters.
9.2.5 Configuring SNMP Settings
Purpose:
You can use SNMP protocol to get device status and parameters related information.
Steps:
1. Enter the Network Settings interface.
Menu > Configuration > Network
2. Select the SNMP tab to enter the SNMP Settings interface.
Figure 9. 22 SNMP Settings Interface
3. Check checkbox to enable SNMP.
4. Configure the SNMP settings.
Figure 9. 23 Configure SNMP Settings
5. Click to save and exit the interface.
Note: Before setting the SNMP, please download the SNMP software and manage to receive the device
information via SNMP port. By setting the Trap Address, the device is allowed to send the alarm event and
exception message to the surveillance center.