HIKVISION 7200HFI-SV Series, User Manual, Page: 154 / 254

User Manual of Digital Video Recorder
153
User Name : Enter the user name of the device. By default it is admin.
Password : Enter the password of the device. By default it is 12345.
Figure 9. 18 Access Device via iVMS4200
5. Click to save and exit the interface.
9.2.3 Configuring NTP Server Settings
Purpose:
A Network Time Protocol (NTP) Server can be configured on your device to ensure the accuracy of system
date/time.
Steps:
1. Enter the Network Settings interface.
Menu > Configuration > Network
2. Select the NTP tab to enter the NTP Settings interface.
Figure 9. 19 NTP Settings Interface
3. Check checkbox to enable NTP.
4. Configure the following NTP settings:
•
Interval: Time interval between the two synchronizing actions with NTP server. The unit is
minute.
•
NTP Server: IP address of NTP server.
•
NTP Port: Port of NTP server.
5. Click to save and exit the interface.
Note: The time synchronization interval can be set from 1 to 10080min, and the default value is 60min. If the
device is connected to a public network, you should use a NTP server that has a time synchronization function,
such as the server at the National Time Center (IP Address: 210.72.145.44). If the device is setup in a more
customized network, NTP software can be used to establish a NTP server used for time synchronization.