By default, the device time should be synchronized manually. You can set the device time
manually or check Sync. with Computer Time to synchronize the device time with the
computer's time.
8.5.4 Set DST
Steps
1. Click Configuration → System → System Settings → DST .
Figure 8-4 DST Page
2. Check Enable DST.
3. Set the DST start time, end time and bias time.
4. Click Save to save the settings.
8.5.5 View Open Source Software License
Go to Configuration → System → System Settings → About , and click View Licenses to view the
device license.
8.5.6 Upgrade and Maintenance
Reboot device, restore device parameters, and upgrade device version.
Reboot Device
Click Configuration → System → Maintenance → Upgrade & Maintenance .
DS-K1T673 Series Face Recognition Terminal User Manual
83
