Tap T&A Status to enter the T&A Status page.
Figure 7-13 Disable Attendance Mode
Set the Attendance Mode as Disable.
You will not view or configure the attendance status on the initial page. And the system will follow
the attendance rule that configured on the platform.
7.9.2 Set Manual Attendance via Device
Set the attendance mode as manual, and you should select a status manually when you take
attendance.
Before You Start
Add at least one user, and set the user's authentication mode. For details, see User Management.
Steps
1. Tap T&A Status to enter the T&A Status page.
2. Set the Attendance Mode as Manual.
DS-K1T673 Series Face Recognition Terminal User Manual
69
