8.5.16 Set Supplement Light Brightness
Set the device supplement light brightness.
Steps
1. Click Configuration → Image → Supplement Light Parameters .
2. Select a supplement light type and mode from the drop-down list. If you select the mode as ON,
you should set the brightness.
8.5.17 Set Beauty Parameters
You can enable beauty camera and set the parameters.
Steps
1. Click Configuration → Image → Beauty Parameters .
2. Check Enable Beauty Photos, and adjust the Whiten Level and Smoothing Skin Level according
to your actual needs.
8.5.18 Time and Attendance Settings
If you want to track and monitor when the persons start/stop work and monitor their working
hours and late arrivals, early departures, time taken on breaks, and absenteeism, you can add the
person to the shift group and assign a shift schedule (a rule for the attendance defining how the
schedule repeats, the shift type, break settings, and the card swiping rule.) to the shift group to
define the attendance parameters for the persons in the shift group.
Disable Attendance Mode via Web
Disable the attendance mode and the system will not display the attendance status on the initial
page.
Steps
1. Click Configuration → Attendance to enter the settings page.
2. Set the Attendance Mode as Disable.
Result
You will not view or configure the attendance status on the initial page. And the system will follow
the attendance rule that configured on the platform.
DS-K1T673 Series Face Recognition Terminal User Manual
95
