607 Series Face Recognition Terminal
User Manual
66
7.3.8
Setting Multiple NICs
Purpose:
You can set the parameters of NIC, NIC type, IPv4 address, Subnet Mask, Default Gateway, MAC,
MTU, and device port.
Note:
The function should be supported by the device.
Before you start:
Adding devices by EHome account.
Steps:
1.
Click Multiple NICs Settings to enter the Multiple NICs settings page.
2.
Set the parameters as you desired.
3.
Click Save to save the settings.
7.3.9
Setting Face Recognition Terminal
Purpose:
You can set the face recognition terminal’s mode, including the face recognition database, save
authenticating face, ECO mode, and work mode.
Note:
The function should be supported by the device.
Steps:
1.
Click Face Recognition Terminal Settings to enter the Face Recognition Terminal Settings page.
2.
Set the face recognition terminal’s parameters.
The parameters descriptions are as follows:
Parameter
Description
Face Picture
Database
You can select Deep Learning as the face picture database.
Save Authenticating
Face Picture
If enabling the function, the captured face picture when
authenticating will be saved to the device.
ECO Mode
After enabling the ECO mode, the device will use the IR
camera to authenticate faces in the low light or dark
environment. And you can set he ECO mode threshold, ECO