607 Series Face Recognition Terminal
User Manual
20
Notes:
The device will be locked for 30 minutes after 5 failed password attempts.
For details about setting the administrator authentication mode, see 6.4.1 Adding User.
6.3
General Parameters Settings
6.3.1
Communication Settings
Purpose:
You can set the network parameters, the RS-485 parameters, the Wi-Fi parameters, and the
Wiegand parameters on the communication settings page.
Tap Comm. (Communication Settings) on the Home page to enter the Communication Settings
page.
Setting Network Parameters
Purpose:
You can set the device network parameters, including the IP address, the subnet mask, and the
gateway.
Steps:
1.
On the Communication Settings page, tap Network to enter the Network tab.