SC7000 Series Smart Camera User Manual
63
Chapter 10 System and Maintenance
10.1 Permission and Password Management
In user management module, you can edit administrator password, set technician password and
permission, etc.
10.1.1 Set Admin Password
User management module allows you to edit admin password, set technician password and its
permission to different operation modules.
Note
●
Only the admin has the permission to access to user management module. If you log in as
technician, there is no this module.
●
The admin can access to all operation and tool modules via web, and assign module operation
permission to technician, while technician can access to and set module parameters assigned by
the admin only.
●
The default admin password is Abc1234.
Click User Management, enter Old Password, New Password, Confirm Password, and Click OK.
Note
After editing admin password, you need to log in again.
Figure 10-1 Set Admin Password
10.1.2 Set Technician Permission and Password
When logging in as admin, you have the permission to set technician password and its permission