HikRobot MV-CL021-40GM, User Manual

Page: 40 / 126

GigE Line Scan Camera
·
User Manual
31

If the frame trigger is enabled, the relation between trigger source and trigger related
parameters is shown below.
Table 7-4 Trigger Source and Trigger Related Parameters
Trigger Source
Parameters
Software Trigger Hardware Trigger
Frequency
Converter Control
Free Trigger
Acquisition Burst Frame
Count
√ √ √ √
Trigger Activation × √ √ √
Trigger Delay √ √ √ √
Frame Trigger Cache √ √ √ √
Trigger Debouncer × √ √ √

If the line trigger is enabled, the relation between trigger source and trigger related
parameters is shown below.
Table 7-5 Trigger Source and Trigger Related Parameters
Trigger Source
Parameters
Hardware Trigger
Shaft Encoder
Control Frequency
Converter Control
Free Trigger
Trigger Activation √ √ √ √
Trigger Delay √ √ √ √
Line Trigger Cache √ √ √ √
Trigger Debouncer √ × × √
7.6.1 Acquisition Burst Frame Count
If the camera enables the frame trigger, you can set the acquisition burst frame count. Click
Acquisition Control > Acquisition Burst Frame Count, and enter Acquisition Burst Frame Count
according to actual demands. Its range is from 1 to 1023.