4
Steps:
1
In the live view interface, press
to
show the menu.
2
Press
/
to select desired
setting bar.
3
Press
button to go to the setting
interface.
Emissivity: Set the emissivity of your
target as the effectiveness in
emitting energy as thermal
radiation.
Distance: Set the distance between
the target and the device.
Unit: Set the temperature unit.
Meas. Range: Select the
temperature measurement range.
The device can detect the
temperature and switch
thermography range automatically
in
Auto Switch
mode.
4
Press
to save and exit.
4.2
Set Temperature Range
Set a temperature section and the palette only
works for targets within the temperature section.
You can adjust the temperature range.
Steps:
1
In the live view interface, press
to
show the menu.
2
Press
/
, and select
Temp
Range
.
3
Select the setting mode.
In
Auto
mode, the device adjusts
temperature range parameters
automatically.
In
Manual
mode, select
Parameter
.
Press
to select the max.
temperature or min. temperature, and
press
/
to adjust the value.
4
Press
to save and exit.
4.3
Set Thermography Rule
Steps:
1
In the live view interface, press
to
show the menu.
2
Press
/
, and select
Rule
.
3
Go to
Display
, and select the hotspot,
cold spot, center spot, or custom spot
that you want to show on live view.
4
Optional:
You can customize the custom
spot if needed.
