HIK VISION DS-1100KI User Manual Download

Page: 99 / 116

User Manual of DS-1100KI Network Keyboard

Note:

Corresponding error message will appear on the screen when user performs wrong operation. E.g., when

the multi-division number entered by the user is not supported by the current output camera, the message”wrong

operation” will appear.

8.3.2 Setting Camera to Monitor

The selected input signal can be outputted and displayed by the decoding channel on the monitor. Currently, the

supported decoding resolution includes: QCIF, CIF, 2CIF, DCIF, 4CIF, 720p, 1080p, VGA, UXGA, etc. The output

interface can be selected to BNC/VGA/HDMI/DVI.

Steps:

Press the

Num + MON

keys to select the monitor.

Press the

Num + WIN

keys to select the display window on the monitor.

You can also directly touch the screen to select the display window.

Press the

Num + CAM

keys to select the input camera.

Example: User can input the “

1+MON

2+WIN

3+CAM

” keys to decode the video signal from camera 3 and

display it on window 2 of monitor 1.

When you press the

0+CAM

keys, it will stop the dynamic decoding of the current window. If no display window is

selected, the decoding of the 1

window will be stopped by default.

Note:

In the local live view mode, when you input

0+MON

keys, only the single-window display mode is supported.

Corresponding error message will appear on the screen when you perform wrong operation.

8.3.3 Setting Camera Group to Monitor

The video signal from the selected camera group can be outputted to and displayed by the decoding channel on

monitor.

When the number of cameras is equal to or less than the number of display windows on screen, e.g., 8

Summary of Contents for DS-1100KI





















































































































Search results

Summary of Contents for DS-1100KI

Reviews:

Related manuals for DS-1100KI

Brands by name

Popular brands

HIK VISION DS-1100KI, User Manual

Search results

Summary of Contents for DS-1100KI

Reviews:

Related manuals for DS-1100KI

Brands by name

Popular brands