HIK VISION DS-1100KI User Manual Download

Page: 98 / 116

User Manual of DS-1100KI Network Keyboard

Press the

ESC

key on the keyboard to enter full-screen preview mode.

Note:

Up to 1080P resolution is supported for local live view.

User can press the

0+CAM

keys to stop the dynamic decoding of the current window.

8.3 Display of Decoded Video on Monitor

8.3.1 Setting Multi-division Display

User is allowed to select different multi-division display modes for the selected output channel. Currently,

1/2/4/9/16-division display modes are configurable.

Steps:

Press the

Num + MON

keys to select the monitor.

Press the

Num + MULT

keys to select the multi-division display mode for the output channel.

Note:

In the local live view mode when user inputs

0+MON

keys, the multi-division display mode is not supported.

Summary of Contents for DS-1100KI





















































































































Search results

Summary of Contents for DS-1100KI

Reviews:

Related manuals for DS-1100KI

Brands by name

Popular brands

HIK VISION DS-1100KI, User Manual

Search results

Summary of Contents for DS-1100KI

Reviews:

Related manuals for DS-1100KI

Brands by name

Popular brands