User Manual of DS-1100KI Network Keyboard
111
Note:
When the current window is configured with multiple channels for display (in cycle view mode), the error
message will appear on the screen as well.
8.5.3 PTZ Speed Control
When the PTZ camera is connected to the keyboard, the PTZ movement speed can be adjusted through Aux key.
Operation method 1:
1.
Input the Num + MON keys to select the output channel.
2.
Input the Num + WIN keys to select the display window.
3.
Press the AUX1/AUX2 key (configured with the PTZ Speed function) to adjust the PTZ movement speed.
When you press the button, the speed will be increased by 1 level. The speed level 1~7 is configurable.
Operation method 2:
1.
Input the Num + CAM keys to select the input channel.
2.
Press the AUX1/AUX2 key (configured with the PTZ Speed function) to adjust the PTZ movement speed.
Note:
When the keyboard is in the server (matrix/analog matrix/iVMS platform) operation mode, the AUX2 key is
fixedly used for PTZ speed control.
8.5.4 Recording
The video from the camera can be recorded and saved in the local U-flash disk as well. Operate the following
steps:
1.
Input the Num + MON keys to select the output channel.
2.
Input the Num + WIN keys to select the display window.
3.
Press the REC key to start video recording.
Note:
During the recording, the REC key on the keyboard lights in red. When you exit the operation interface, the
recording continues and you are allowed to stop it. When the window is configured with multiple channels for
display (in cycle view mode), the error message will appear on the screen. And if the current window or output
channel is performing playback by time, then the recording operation is not allowed.
8.5.5 Other Functions
The PREV and NEXT keys on the keyboard are used to select the previous or next camera during the shortcut
operation.
Operation method 1:
1.
Input the Num + MON keys to select the output channel.
2.
Input the Num + WIN keys to select the display window.
3.
Press the PREV/NEXT key to select the previous or next camera.
Note:
If the current window is not in the dynamic decoding mode, it is invalid to press the PREV/NEXT key. When
the window is configured with multiple channels for display (in cycle view mode), the error message will appear
on the screen.
Operation method 2:
1.
Input the Num + CAM keys to select the input channel.
