User Manual of DS-1100KI Network Keyboard
110
8.5 Aux Functions
The keyboard is designed with AUX1 and AUX2 keys on its panel. You are allowed to configure Aux function for
AUX1/AUX2 key on the operator user interface. By default settings, the AUX1 is selected to Two-way Audio and
the AUX2 to Picture Capture function.
8.5.1 Two-way Audio
The two-way audio between the keyboard and the currently selected device can be realized through Aux key.
Start two-way audio with the output channel:
1.
Input the Num + MON keys to select the output channel.
2.
Press the AUX1/AUX2 key to start two-way audio.
Start two-way audio with the input channel:
1.
Input the Num + CAM keys to select the input channel.
2.
Press the AUX1/AUX2 key (configured with the Two-way Audio function) to start two-way audio.
During the two-way audio:
1.
You can stop it by pressing the “0+AUX1/AUX2” keys;
2.
When you input “Num + MON” keys and then presses the “AUX1/AUX2”key, it will switch the keyboard to take
two-way audio with the nearest device;
3.
If it needs to take two-way audio with the camera, it needs to press the ESC key, input the “Num + CAM” keys
and then press the “AUX1/AUX2”key to start the two-way audio.
When the network is disconnected in the process of two-way audio, you should press the “0+AUX1/AUX2” keys to
stop the two-way audio first and then start it again. When you intend to start the two-way audio between the
keyboard and the remote device which is taking two-way audio with other device, the error message will appear
on the screen.
Note:
When the current window is configured with more than channels for display (in cycle view mode), the error
message will appear on the screen as well.
8.5.2 Picture Capture
The video picture from the camera can be captured and saved in U-flash disk through the keyboard operation.
Operation method 1:
1.
Input the Num + MON keys to select the output channel.
2.
Input the Num + WIN keys to select the display window.
3.
Press the AUX1/AUX2 key (configured with the Picture Capture function) to start picture capture.
Operation method 2:
1.
Input the Num + CAM keys to select the input channel.
2.
Press the central button of the joystick.
3.
The captured picture will be uploaded to keyboard and saved in the local U-flash disk.
