User Manual of DS-1100KI Network Keyboard
104
complete the preset settings. You are also allowed to directly select the camera by inputting Num + CAM keys and
then press the PRESET key to start patrol settings.
•
Setting a Preset by Output Channel
Steps:
3.
Input the Num + MON keys to select the output channel.
4.
Input the Num + WIN keys to select the display window.
5.
Operate the joystick to move PTZ to the desired position.
6.
Press the Num + PRESET keys to set the current position as the preset with entered number.
Note:
Corresponding error message will appear on the screen when you perform wrong operation.
•
Setting a Preset by Input Channel
Steps:
1.
Input the Num + CAM keys to select the input channel.
2.
Operate the joystick to move PTZ to the desired position.
Press the Num + PRESET keys to set the current position as the preset with entered number.
Note:
1.
It is invalid to input the 0+CAM keys in the current operation mode.
2.
Corresponding error message will appear on the screen when you perform wrong operation.
8.4.3 Calling a Preset
The programmed preset can be called to achieve the desired position. Select the output monitor or window and
then press the CALL key on the keyboard to call the preset. You are also allowed to directly select the camera by
inputting Num + CAM keys and then press the CALL key to realize preset callup.
•
Calling a Preset by Output Channel
Steps:
1.
Input the Num + MON keys to select the output channel.
2.
Input the Num + WIN keys to select the display window.
3.
Press the Num + CALL keys to call the programmed preset.
