User Manual of DS-1100KI Network Keyboard
99
cameras
9 windows, then each camera will be displayed on its corresponding monitor respectively, e.g.,
camera 1 on window 1, camera 8 on window 8, etc.
2.
When the number of cameras is more than the number of display windows on screen, e.g., 34 cameras
16
windows, then the camera 1-16 will be displayed on window 1-16, camera 17-32 on window 1-16, and
camera 33-34 on window 1-2 in cycle view mode.
Note:
The default dwell time for the cycle view is 30 sec.
Steps
:
1.
Press the
Num + MON
keys to select the monitor.
2.
Press the
Num + CAM-G
keys to select the input camera group to be decoded and displayed on the monitor.
Note:
1.
In the local live view mode when you input
0+MON
keys, the multi-division display mode is not supported.
When you press the
0+CAM
keys, it will stop the dynamic decoding of the current window.
2.
Corresponding error message will appear on the screen when you perform wrong operation.
8.3.4 Setting Camera Group to Window
The video signal from the camera group can be outputted to and displayed on the selected window of monitor in
cycle.
Note:
The default dwell time for the cycle view is 30 sec.
Steps
:
1.
Press the
Num + MON
keys to select the monitor.
2.
Press the
Num + WIN
keys to select the display window on the monitor.
3.
Press the
Num + CAM-G
keys to select the camera group.
Example: You can input the “
1+MON
,
2+WIN
,
3+CAM-G
” keys to decode the video signal from camera group 3 and
display it on window 2 of the monitor 1.
Note:
In the local live view mode when you input
0+MON
keys, the cycle view function is not supported. When
you press the
0+CAM
keys, it will stop the dynamic decoding of the current window.
