For information on Care and Cleaning or to register your
SEQUOIA
PROFESSIONAL
product by highwood , please visit
www.highwood-usa.com
.
SEQUOIA
PROFESSIONAL
by
high
wood
PERGOLA ASSEMBLY
PAGE 16 of 16
28) Place the (8) Top Slats on
Top of, and Perpendicular to the
Joists and Upper Support Beams,
with the 45 Angle Facing Down.
29) Use the Top Slat Index to Set
the Location of the First Top Slat.
Set the Top Slat Index on Top of the
Joist as Shown Above, and Adust the
Top Slat Until it Rests Against the
Top Slat Index.
30) Secure the Top Slat to Each
Upper Support Beam and Each Joist
Using (7) D Screws. Each Top Slat
has Pre-Drilled Holes Which Will Align
with the Joists and Beams it Sets on.
Follow Step 29 Prior to Securing Each
Screw to Ensure the Top Slat
Remains Straight.
31) To Set the Location of Each
Subsequent Top Slat, Use the Slat Spacer
to Set the Center-to-Center Distance
Between Top Slats. Use the Second Slat
Spacer to Maintain Proper Spacing of the
Joists as Shown Above. Move Each of the
Spacers Accordingly so they are Near the
Area of the Top Slat Being Secured. This
will Ensure all Slats Remain Straight and
Square with One Another.
32) Secure Each Remaining
Top Slat with (7) D Screws.
CM-PGLA-1212
04.30.21
Upper Support Beam
Top Slat (x8)
Top
Slat
Index
Slat Spacer
