For information on Care and Cleaning or to register your
SEQUOIA
PROFESSIONAL
product by
highwood
, please visit
www.highwood-usa.com
.
PAGE 1 OF 2
INCLUDED TOOLS
5/32" HEX KEY
IMPORTANT!
DO NOT fully tighten the bolts until all
bolts are started. Once all bolts are inserted,
go back & tighten all the bolts.
Retain these instructions for future reference
HARDWARE
SEQUOIA
PROFESSIONAL
by
high
wood
1)
Insert (1) "A" Bolt into Lower Hole on Each Side to
Attach Seat to Back. Make Sure the Back is Fully Upright.
Make Bolts Snug, but Do Not Overtighten.
CM-CHRSQC2
03.05.19
A
x18
1/4"-20 x 1-3/4"
2)
With the Chair Laying on its Left Side, Attach
the Right Leg to the Seat Using (3) "A" Bolts.
NOTE: Arm Goes on
Top of Back Support
A
A
SEAT
BACK
RIGHT LEG
A
SEAT
Sequoia Professional
Counter Height Muskoka Chair
Assembly Guide
