For information on Care and Cleaning or to Register your
highwood
product, please visit www.highwood-usa.com.
PAGE 2 OF 2
MLBX1
08.03.2021
3)
Insert (2) "A" Screws Into
Clearance Hole in Post and Align
with Pilot Holes in Crossbar. Fasten
Using T-15 Torx Bit.
4)
Insert (2) "A" Screws Into
Clearance Holes in Brace and Align
with Pilot Holes in Crossbar and
Post. Fasten Using T-15 Torx Bit.
CROSSBAR
POST
PILOT HOLES
A
Crossbar
A
A
BRACE
POST
CROSSBAR
BASE
A
A
POST
5)
Insert (2) "A" Screws Into
Clearance Holes in Base and Align
with Pilot Holes in Crossbar. Fasten
Using T-15 Torx Bit.
6)
Remove Cover on (4) Adhesive
Pads and Slide Cap Over Top of
Post. Press Down Firmly On Cap to
Attach.
Attach Any Mailbox Purchased
Seperately Per Instructions Included
with Mailbox.
ADHESIVE PAD
CAP
