High End Systems studio color, User Manual

Page: 61 / 114

Chapter 3 Menu System 3-11
Introduction
Menu System
3
Test Menu
Use the following subsections to perform the functions contained within the
T E S T
menu.
Manually Homing the Fixture
To manually home the fixture, complete the following procedure:
1. Hold the <
MENU
> button until the display changes to
A d d R
.
2. Using the up and down buttons, scroll down to the
T E S T
field and press
the <
ENTER
> button. The screen will display
H O M E
.
3. Press the <
ENTER
> button to home the fixture. The display will indicate
R S T
(reset) and
H O M E
during the process. The fixture will
automatically reset the display when the process is complete.
Moving the Fixture to Setup Position
Caution: The setup position is used only by service personnel before maintenance
routines.
To place the fixture in setup position before service, complete the following
procedure:
1. Hold the <
MENU
> button until the display changes to
A d d R
.
2. Using the up and down buttons, scroll down to the
T E S T
field and press
the <
ENTER
> button.
3. Using the up and down buttons, scroll down to the
S / U P
field and press
the <
ENTER
> button. The display will indicate
S E T N O W
while the
motors are electronically locked into place.
4. Perform the appropriate maintenance procedures.
5. Press the <
MENU
> button to reset and home the fixture.