background image

viii

Ecodome

®

 User Manual

Appendice A   Informazioni Importanti Di Sicurezza ....................................................... A-5
Apendice A   Informacion Importante De Seguridad ...................................................... A-7
Vigtig Sikkerhedsinformation - DANMARK  ...................................................................... A-8

Table of Figures

Figure 1-1.  Ecodome road case.  .......................................................................................1-1
Figure 1-2. Ecodome dome.  ..............................................................................................1-2
Figure 1-3. Contents of the housing box. ...........................................................................1-2
Figure 1-4. Contents of the base box.  ................................................................................1-3
Figure 1-5.  Correct mounting position. .............................................................................1-3
Figure 1-6. Recommended foundation layout for Ecodome.  ...........................................1-5
Figure 3-1.  Location of the air filters. ................................................................................3-2
Figure 3-2.  Oiling the blower motor.  ................................................................................3-3

Table of Tables

Table intro-1. Ecodome Optional Accessories  ............................................................ intro-1

Summary of Contents for ecodome






















































Reviews: