60600239 Version 2.1
page 1
Before You Begin
Please note the following warnings and cautions b
ef
ore performing the procedure outlined in this
Installation Instruction.
Warnings: Disconnect power before servicing.
Equipment surfaces may reach temperatures up to 130° C (266° F). Allow the fixture to
cool before handling.
Open the Fixture
1. Lock fixture head in horizontal position.
2. Disengage the two latches (A) on the bezel and remove the back cover.
3. Remove the front bezel cover by turning two 1/4 turn latches (B).
4. Remove both side covers (C) by turning two 1/4 turn latches.
Install the Camera Module
1. Slide the camera module’s
cable connector (D) straight
out and lift to install the
ribbon cable that shipped with
your kit. Insert ribbon cable
with the blue side up and
close connector.
2. Connect Camera Cable (E)
(p/n 90409161) to the camera
module below the ribbon
cable.
A
A
B
C
D
E
Subject: DL.1 Digital Eye Technology
Camera Installation
Product Line: DL.1
Date: 11/20/04
Installation Instruction
