USER MANUAL - rev 10
RS
Dehumidifiers for radiant systems
13 - 52
5
USER TERMINAL
The unit leave the factory with status “OFF” (to turn it on, keep pressed for more than 1 second the [STAND-BY] key, and it will turn
to “ON”), ready to function.
The control manages all the functions and the devices of the unit, by operating under the call from the external humidistat.
Remember that the compressor has a delay when starting and re-starting of 5 minutes, in order to avoid mechanical damages to the
internal components.
Every problem / error is displayed, according to the DIAGNOSTICS AND ALARMS chapter.
By default, the ventilation is combined with the compressor starting.
Some of these regulations can be modify according to the PARAMETERS TABLE below.
5.1
DISPLAY AND KEYS
UP (
▲
)
Increases the values / Browses parameters.
Turns off the sound alarm, if present.
DOWN (
▼
)
Decreases the values / Browses parameters.
STAND-BY
Hold down more than 1 second, it changes the OFF status to the ON one and vice-versa.
When the status is changed, a sound signal is emitted.
In stand-by status, unit stops and on the display there is OFF.
SET
Allows to set the parameters.
Restores the sound alarm, if present.
Except from the programming, it has no functions.
