Easy HD Expressway!
WWW.HIDES.COM.TW
3
2. Click on
next and you will see the following after it’s finished.
3. If necessary , you can check if the device
“IT9300 BDA Device” is listed in device manager
BDA Viewer Plus
– Scan/ Play/ Capture TS
1. Make sure to connect UT-160 with the antenna or coaxial cable first.
2.
Copy the folder
“\Bd” on the CD to your local hard disk, say C:, D:, E: or F:…
The
following instructions assume F: drive is used.
3.
Double click on “Install_Filter.bat” in F:\Bd\ to install required filters to run BDA
Viewer.
4. Double
click on “BDAViewerPlus.exe” in F:\Bd\ folder.
5.
Click on “Control-> Channel List” to launch the scan window.
