pivCLASS How to Order Guide – D00456, A.4
Page 4 of 11
© 2007-2013 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
May 2013
pivCLASS Readers
Obtaining individual pivCLASS reader part numbers requires the use of the online pivCLASS Reader Configurator. You do not need to be pivCLASS certified to resell
pivCLASS readers.
Description
Part Number
Base
Part No.
125 kHz
Interpreters
1
13.56 MHz
Interpreters
Controller
Communications
2
Controller
Hardware
Connection
Product
Version
Color
Security
3
Specific
Configuration
Settings
4
pivCLASS R10 & RP10
Mini-Mullion Contactless Reader
900
N = Without Prox
P = With Prox (Std)
H
(contactless)
P = RS485 HDX
R = RS485 FDX
(See note 2)
N = Pigtail
T = Terminal Strip
E
K = Black
G = Gray
0 = Standard
E = Elite
XXXX
pivCLASS R15 & RP15
Mullion Contactless Reader
910
pivCLASS R40 & RP40
Wall Switch Contactless Reader
920
pivCLASS RK40 & RPK40
Wall Switch Contactless Keypad Reader Keypad 921
pivCLASS RKCL40 & RPKCL40
Wall Switch Contact/Contactless Keypad Reader
with LCD display
923
N = Without Prox
P = With Prox (Std)
P
(c
contactless)
P = RS485 HDX
R = RS485 FDX
(See note 2)
N = Pigtail
T = Terminal Strip
E
K = Black
0 = Standard
E = Elite
XXXX
pivCLASS RKCLB40 & RPKCLB40
Wall Switch Contact/Contactless Keypad Reader
with LCD display and Biometric sensor
924
1
125 kHz Prox Interpreters
Order P for standard format support = HID Prox, AWID, EM4102 and Indala (10022 – 26-bit).
All pivCLASS readers support high frequency 13.56 MHz technology.
2
Controller Communications
R = Default option. Supports both Wiegand out and full duplex (FDX) RS-485. Reconfigurable in field from Wiegand to RS485 using a programming card. FDX required for use with PAM.
P = Supports both Wiegand out and half duplex (HDX) RS485 with OSDP v1 protocol. Reconfigurable in field from Wiegand to RS485 using a programming card. HDX is not supported by PAM.
Factory configuration option for Wiegand mode is determined by the “Specific Configuration Settings”. See note 4 below.
3
iCLASS
®
Security Options (Factory or Field Configurable)
0 = Standard Security (Version 1) Keyset – compatible with iCLASS SE
®
, iCLASS SR, standard iCLASS, SE for MIFARE Classic and SE for MIFARE DESFire EV1 credentials.
E = Elite, reads only SE Elite
TM
credentials with unique matching keys – compatible with iCLASS SE, iCLASS SR, standard iCLASS, SE for MIFARE Classic and SE for MIFARE DESFire EV1 with matching Elite keys. Line item
on PO requires ICE reference number.
4
Specific Configuration Settings
Identifies all firmware configurations including Wiegand output settings, PAM and OSDP mode settings and audio/visual settings (e.g., default setting): buzzer on, LED normally red, flashes green on read, buffer one key, no
parity, 4 bit message. Use the pivCLASS, iCLASS SE, multiCLASS Configuration Guide located on the HID Global PIV & FIPS 201 Solutions web page (
https://www.hidglobal.com/government/piv
) to obtain the complete
reader part number.
