2.4 Print head cleaning routine
Video link:
https://player.vimeo.com/video/679257775
The following diagram shows the location of the print head.
1. Open the printer front door.
2. Slide the ribbon drawer out and remove the ribbon material.
3. Turn the power off by switching the power switch to off position (O).
4. Remove the print head cleaning swab from the packaging.
5. Rub the swab back and forth on the print head terminals.
Repeat this a few times, while flipping the swab over to the other side as well.
6. Reload the ribbon material.
7. Slide in the ribbon drawer and close the front door.
8. Switch on the printer.
PLT-06394, A.0
10
February 2022
Powering
Trusted Identities
HID® FARGO® HDP®6600
Recommended Maintenance
Summary of Contents for FARGO HDP 6600
Page 4: ...Section 01 Introduction...
