NGS Mach II User Guide v1.1
Diagnostic Functions
17
Test Descriptions
The following is a description of
some
of the diagnostic tests that may be available for your vehicle. Remember,
the tests available vary depending on the vehicle and module selected.
PID/Data Monitor
Note: Recording is only available for non-CAN
vehicles.
Within the recording function you have these
options:
1. You can make a recording of PIDs you
choose from the PID Select Screen.
2. You can monitor your selected PIDs during
the recording.
3. You can view the recording before you
decide to save it.
4. You can save the recording to a memory
bank (three memory banks allow you to
save three recordings). When you save a
recording, it remains in the memory bank
for up to 48 hours after you turn off NGS
Mach II.
Although you probably won’t need to save
every recording, remember that
unless
you save
a recording,
NGS Mach II will
erase it
when you exit this option.
2. Select
PID/DATA MONITOR AND RECORD:
DIAGNOSTIC TEST MODES
PID/DATA MONITOR AND RECORD
DIAGNOSTIC TROUBLE CODE LIBRARY
ACTIVE COMMAND MODES
MODUE IDENTIFICATION
SELECT ITEM AND PRESS TRIGGER TO START
With PCM, the priority screen displays:
SELECT ALL
FULL PRIORITY
IGNITION PRIORITY
TRANSMISSION PRIORITY
EGR PRIORITY
SELECT ITEM AND PRESS TRIGGER TO START
3. The next screen displays three windows:
•
modules
on the same data link
•
total PIDs
you select for all modules on
the same data link
•
PIDs
available for module selected
GEM 04
ABS 00
IABM
00
l
DEFN
TRANGR *WASHRLY *WPPK_PK
TURN-SW *WFL_LMP
WPPRKSW
UBATGEM *WFLUID
WPRUN
USS_GEM WPHISD
*WASH_-SW WPMODE
TOTAL=05
CLEAR BLOCK START
d
The PIDs and modules may extend over
two or more screens. Use the dial to move
through the modules and the PIDs.
Note: NGS Mach II can monitor PIDs for all
modules on the same link.
Choose a module to access related PIDs.
Press
to move from window to
window.
